MCSE CCNA CCNP
MCSE
(Home)
--------------------------
MCSE
Bootcamp
mcse boot camp uk
mcse training
MCSE Boot camp
Real CCNA Boot camp
Real CCNP Boot camp
Payless MCSE Camp
CCNP Boot camp
MCSE certification
CCNA Boot Camp Training:
CCNA
Boot Camp Benefits
: CCNA Boot camp Curriculum :
CCNA Boot camp Exam Details :
CCNA Boot camp Details
Curriculum
for CCNA Boot camp Course :
Courseware
The classroom activities you will be involved in go far beyond the books that are provided. We select materials that will also be useful reference material after the event. Each Participant will receive Microsoft Official Curriculum Book set for Each Course.
Our goal is to create a Industry Like environment and not simply a class. You will be absorbed in lectures, demonstrations, discussions, group labs and reviews.
Here is a list of the materials provided in our CCNA Boot Camp:
Introduction to Cisco® Router Configuration (Cisco Press)
The
Internetworking Model; Applications and Upper Layers; Physical and
Data Link Layers; Network Layer and Path Determination; Basic Router
Operations; Configuring a Router; Discovering and Accessing Other
Cisco Routers; TCP/IP Overview; IP Addressing; IP Routing Configuration;
Configuring Novell IPX; Configuring AppleTalk; Basic Traffic Management
with Access Lists; Introduction to WAN Connections; Configuring
X.25; Configuring Frame Relay.
CCNA Exam Preparation Guide (Vibrant)
The "Vibrant Important Notes" are custom made for each attendee, with valuable information about Each topic is created and distributed. We include tabbed sections for each course/test you are in engaged with, and lots of blank paper for taking and organizing your notes.
This
study guide and/or material is not sponsored by endorsed by or affiliated
with Cisco Systems, Inc. Cisco®, Cisco Systems®, CCDA™,
CCNA™, CCDP™, CCNP™, CCIE™, CCSI™, the
Cisco Systems logo and the CCIE logo are trademarks or registered
trademarks of Cisco Systems, Inc. in the United States and certain
other countries. All other trademarks are trademarks of their respective
owners.
*
Vibrant reserves the right to change course
in Camp as suitable.
Ethernet employs CSMA/CD (Carrier
Sense Multiple Access w/ Collision Detection); nodes can access the
network any time they have data to send. Before a node transmits
data, it “listens” to the wire to see if the network is busy. If
not, it transmits. Collisions occur if two nodes listen, hear
nothing, and transmit simultaneously. This ruins both transmissions.
There is a back-off algorithm that creates a random wait time for
retransmission so that a second collision does not occur.
MAC addresses consist of a 48-bit address expressed as 12
hexadecimal digits.
The first 6 digits, the OUI (Organizationally Unique Identifier),
are the unique numbers assigned to the vendor by the IEEE (called
the burned-in address), and the remaining 6 digits are the serial
number or series. As a result, each NIC has a different MAC address
on any given LAN or WAN.
Ethernet commonly uses RJ-45 (registered jack/wiring sequence #45)
connectors at the hardware layer.
Fast Ethernet employs auto-negotiation, which allows an Ethernet
device to determine the speed of the link and the duplex (half or
full) setting. Auto-negotiation has been known to fail. Cisco
recommends using static settings for important devices.
UTP (Unshielded Twisted Pair); these wires are unshielded because
UTP derives all of its EMI protection from the cancellation effect
of twisted pairs. This technique minimizes the absorption of EMI
from the surrounding environment. This helps reduce cross talk and
nearby electrical noise.
STP (Shielded Twisted Pair); Similar to UTP, but has a foil shield
covering the wires to reduce EMI.